Differences

This shows you the differences between two versions of the page.

--- connect [2019/11/13 13:02] – [Login] graf
+++ connect [2026/04/24 11:22] (current) – ursgraf
@@ Line 2: / Line 2: @@
 ==== Start your Beagle Bone Blue ====
   * Connect the micro USB with the PC.
-  * It takes about 15 seconds until the Beagle Bone Blue is powered up and another 15 seconds until a network adapter is shown on your host pc. Open a Terminal and check if this network is already available. <code>$ ifconfig </code> If you work on the host in a virtual machine, you might need to select the device //BeagleBone.org// among your various USB devices.
+  * It takes about 15 seconds until the Beagle Bone Blue is powered up and another 15 seconds until a network adapter is shown on your host pc. Open a Terminal and check if this network is already available. <code>$ ip a </code> If you work on the host in a virtual machine, you might need to select the device //BeagleBone.org// among your various USB devices.
-  * Connect via ssh to your Beagle Bone Blue <code>$ ssh debian@192.168.7.2</code> Default credentials are "debian:temppwd"
+  * Connect via ssh to your Beagle Bone Blue <code>$ ssh ost@192.168.7.2</code> Default credentials are "ost:ost"
-==== Login ====
+==== First Login ====
 The first time you do this you will get a security alert in the console - type "yes" and hit enter.
-Then enter the password "temppwd" and confirm with enter. Don't be alarmed if the console does not response while you type your password.
+Then enter the password and confirm with enter. Don't be alarmed if the console does not response while you type your password.
 ----
 **Next: [[test|]] **