User Tools

Site Tools


connections

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
connections [2019/11/18 14:33] grafconnections [2020/02/27 17:57] ursgraf
Line 2: Line 2:
 ===== System Overview ===== ===== System Overview =====
 This overview shows the whole system together with all necessary modules. This overview shows the whole system together with all necessary modules.
-{{ :delta:electric_connections_overview.jpg?800 |}}+{{ :delta:connections:electric_connections_overview.jpg?800 |}}
  
 ===== LEDs and Buttons ===== ===== LEDs and Buttons =====
Line 8: Line 8:
 The robot is equipped with three buttons with leds. The buttons can be used to trigger actions. The leds are used to indicate operating states. The next picture shows the pin connections.  The robot is equipped with three buttons with leds. The buttons can be used to trigger actions. The leds are used to indicate operating states. The next picture shows the pin connections. 
  
-{{ :delta:led.jpg?300 |Test}}+{{ :delta:connections:led.jpg?300 |Test}}
  
 The buttons and leds must be connected to the breadboard (picture at bottom of this page) where the necessary resistors are placed and where the connectors to the Beaglebone blue board can be made.  The buttons and leds must be connected to the breadboard (picture at bottom of this page) where the necessary resistors are placed and where the connectors to the Beaglebone blue board can be made. 
  
-{{ :delta:led_connections.jpg?700 |}}+{{ :delta:connections:led_connections.jpg?700 |}}
  
 ^Connector^Pin assignment^BBBlue Channel^Connection^ ^Connector^Pin assignment^BBBlue Channel^Connection^
Line 34: Line 34:
 The Faulhaber Motors are equipped with a ribbon cable with connector.  The Faulhaber Motors are equipped with a ribbon cable with connector. 
  
-{{ :delta:arm_motor_1.jpg?300 |Test}}+{{ :delta:connections:arm_motor_1.jpg?300 |Test}}
  
 Connections:  Connections: 
Line 49: Line 49:
 https://www.adafruit.com/product/757 https://www.adafruit.com/product/757
  
-{{ :delta:level_shifter_adafruit.jpg?200 |Test}}+{{ :delta:connections:level_shifter_adafruit.jpg?200 |Test}}
  
 This is one connection example for one motor, with encoder: This is one connection example for one motor, with encoder:
  
-{{ :delta:example_motor_connection.jpg?600 |}}+{{ :delta:connections:example_motor_connection.jpg?600 |}}
  
 ===== Breadboard ===== ===== Breadboard =====
Line 59: Line 59:
 We connect all additional components to a breadboard of Adafruit https://www.adafruit.com/product/1609 and place it near the Beaglebone blue. Connections are shown in the following sketch: We connect all additional components to a breadboard of Adafruit https://www.adafruit.com/product/1609 and place it near the Beaglebone blue. Connections are shown in the following sketch:
  
-{{ :delta:bredboard_skizze.jpg?1000 |}}+{{ :delta:connections:breadboard_skizze.jpg?1000 |}}
  
 ===== Physical Situation ===== ===== Physical Situation =====
connections.txt · Last modified: 2020/02/27 17:58 by ursgraf