hardware
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
hardware [2019/02/28 16:17] – [Encoder] graf | hardware [2019/07/09 15:36] (current) – removed graf | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ======== Hardware ======== | ||
- | The hardware part of the Delta robot is not completed yet. There will probably be a pcb added in the near future so that there is no need for this tutorial. | ||
- | |||
- | ===== Datasheets ===== | ||
- | | ^Axis Motors ^ TCP Motor ^ | ||
- | ^Motor|{{: | ||
- | ^Encoder|{{: | ||
- | ^Gear|{{: | ||
- | |||
- | ^Beagle Bone Blue^ | ||
- | |{{: | ||
- | |{{: | ||
- | |{{: | ||
- | |||
- | ^Electromagnet^ | ||
- | |{{: | ||
- | |||
- | |||
- | ===== Power Supply ===== | ||
- | The Beagle Bone Blue can be operated with the 12V DC Power supply, 7.4V DC from a battery or with the 5V from the USB. You can’t run the motors when only powered over USB, so you have to connect an 7.4V battery or the 12V Power supply. You also need 12V on the adapterprint fort he electromagnet (see gpios). | ||
- | {{ : | ||
- | |||
- | ===== Encoder ===== | ||
- | To get the +5V to the adapter print you can simply get it from the PWR port of the Beagle Bone Blue. You’ll need this 5V for both types of encoders used on the Delta. The encoder inputs of the Beagle Bone Blue are only 3.3V capable. To get the signals from 5V down to 3.3V a voltage divider is used for each encoder channel. | ||
- | {{ : | ||
- | \\ \\ | ||
- | ===== GPIOs ===== | ||
- | You can get the 3.3V also from the PWR port of the Beagle Bone Blue. This is used for the button pullups. The leds are pulled down and driven with the 3.3V from a gpio. \\ | ||
- | The output of the gpios is only 3.3V. To get a stronger magnetic field from the elctromagnet, | ||
- | |||
- | |||
- | ===== Part list ===== | ||
- | ^Pos^Name^Pcs^Description^Link^ | ||
- | |0|Beagle Bone Blue|1|Beagle Bone Blue Rev A.0|https:// | ||
- | |1|Cable Set|1|Cable set for Beagle Bone Blue|https:// | ||
- | |2|Axis Motors|3|Faulhaber 1524-012SR|https:// | ||
- | |3|Encoder for Axis Motor|3|Faulhaber IEH2-4096|https:// | ||
- | |4|Gear for Axis Motor|3|Faulhaber 15/8 76: | ||
- | |5|TCP Motor|1|Faulhaber 0816-012SR|https:// | ||
- | |6|Encoder for TCP Motor|1|Faulhaber HEM3-256W|https:// | ||
- | |7|Gear for TCP Motor|1|Faulhaber 08/3 120: | ||
- | |8|Electromagnet |1|GTO-14-0.5000 12VDC|http:// | ||
- | |9|Lighted pushbutton red|1|R13-548CL-05-BR|https:// | ||
- | |10|Lighted pushbutton green|1|R13-548DL-05-BG|https:// | ||
- | |11|Lighted pushbutton blue|1|R13-548A-05-BB|https:// | ||
- | |||
- | Adapter print | ||
- | ^Pos^Name^Pcs^ | ||
- | |0|Stripboard|1| | ||
- | |1|Resistor 680 Ohm|4| | ||
- | |2|Resistor 330 Ohm|4| | ||
- | |3|Resistor 1 kOhm|7| | ||
- | |4|Transistor BC337|1| | ||
- | |5|Diode |1| | ||
- | |6|Male connector 6 pins|4| | ||
- | |7|Male connector 4 pins|4| | ||
- | |||
hardware.1551367071.txt.gz · Last modified: 2019/02/28 16:17 by graf