Differences

This shows you the differences between two versions of the page.

--- deltamounting:start [2020/02/27 17:46] – ursgraf
+++ deltamounting:start [2020/02/27 17:48] (current) – ursgraf
@@ Line 59: / Line 59: @@
 Mount the three push buttons and the three motor flanges (M3x10) onto the base plate according to //fig. 2.5//. \\
-[{{:deltamounting:deltamountinginstructions05.png|fig. 2.5}}] \\
+[{{:delta:mounting:deltamountinginstructions05.png|fig. 2.5}}] \\
 Mount each motor onto a motor flange (M2x5). \\
 Insert the motor cable carefully into the cable route (//fig. 2.6//). \\
-[{{:deltamounting:deltamountinginstructions06.png|fig. 2.6}}] \\
+[{{:delta:mounting:deltamountinginstructions06.png|fig. 2.6}}] \\
 Now put the beagle bone blue board into its beagle bone case and align it by using the according drilling holes on the base plate (//fig. 2.7a//). According to //fig. 2.7b//, make sure to fix the shown corner first (M2.5x25). \\
-[{{:delta:mounting:deltamountinginstructions07.png|fig. 2.7a}}] [{{:deltamounting:deltamountinginstructions08.png|fig. 2.7b}}] \\
+[{{:delta:mounting:deltamountinginstructions07.png|fig. 2.7a}}] [{{:delta:mounting:deltamountinginstructions08.png|fig. 2.7b}}] \\
 Then add the case’s top cover and fix the remaining three corners (M2.5x25) according to //fig. 2.8//. \\
-[{{:deltamounting:deltamountinginstructions09.png|fig. 2.8}}] \\
+[{{:delta:mounting:deltamountinginstructions09.png|fig. 2.8}}] \\
 Now mount the three upper arms (//fig. 2.9//). \\
 [{{:delta:mounting:deltamountinginstructions10.png|fig. 2.9}}] \\