Differences

This shows you the differences between two versions of the page.

--- run [2021/06/11 15:42] – [Autostart] ursgraf
+++ run [2026/09/23 16:52] (current) – [Get Output of Loggers after Autostart] ursgraf
@@ Line 3: / Line 3: @@
 ====== Running the Delta Application ======
+Start your application in a terminal while the above command is still running
-Next, ssh into the target. Before you start the delta application you have to make sure that your mouse works with
-<code>
-ost@bblue:$ sudo cat /dev/input/event1
-</code>
-Start your application in a second terminal while the above command is still running
 <code>
-ost@bblue:$ cd bin
+ost@bblue:$ sudo ./bin/delta -c bin/HwConfigBBBlue.json
-ost@bblue:$ sudo ./delta -c HwConfigBBBlue.json
 </code>
@@ Line 37: / Line 29: @@
 ost@bblue:$ sudo systemctl enable delta-startup
 </code>
-and reboot
+and reboot with
 <code>
 ost@bblue:$ sudo /sbin/reboot
 </code>
-Now, the Delta application will start 20s after the board is powered up and the operating system finished its bootup procedure. When the Delta application terminates the Beaglebone Blue will shutdown after 30s. You can terminate the application as described in [[user_interface|]].
+Now, the Delta application will start 5s after the board is powered up and the operating system finished its bootup procedure.
-:!: Please note that upon termination of the program the BeagleBoneBlue will shutdown and you will loose your ssh connection.
 ===== Get Output of Loggers after Autostart =====
@@ Line 53: / Line 43: @@
 </code>
 You could also terminate the application by pressing ''CTRL-C''. \\
-:!: Please note that upon termination of the program the BeagleBoneBlue will shutdown and you will loose your ssh connection.
 ----
 **Next: [[dev|]]**